WASTE COMPACTING CONVEYORS > Screw Sifter Model TTP
INTRODUCTION:
The TTP screw sieve is a simple but robust design equipment, ideal for pre-treatment in small sewage plants and industries, installed directly in a channel.
It provides excellent performance at a very competitive price, as it includes several processes in the same equipment: sieving, transporting and compacting the waste before unloading the solids into a container.
DESCRIPTION:
The waste water flows through the screen, which is installed directly in the intake channel, and in this way the suspended solids are retained according to the passage width of the filter screen. Smaller solids can be retained due to basket clogging, resulting an even better sieving.
When the water reaches a pre-set level, the screw begins to rotate, cleaning the filter screen and transporting the retained residue to the compaction and discharge zone. The cleaning of the mesh is carried out by means of a very resistant brush incorporated in the screw in the area of the basket. The filtering mesh is semi-circular in shape and is made of perforated stainless steel plate. The standard gap size are 3 and 6 mm.
In the compaction zone there is an antechamber with a drainage profile that allows the raised solids to be drained and compacted before being unloaded into the container. The pressing area is fitted with a standard water connection for washing the residue and for regular maintenance cleaning.
The TTP screw sieve has the following FEATURES:
- Equipment made of stainless steel.
- Filter mesh made of perforated plate.
- Integrated waste compacting area.
- Low installation cost.
- Low maintenance cost.
-
Robust and reliable equipment.
GENERAL DIMENSIONS:
The flow rates indicated in the table below correspond to maximum values for continuous operation. The equipment must be protected with a 50 mm pre-grid with at least a 50 mm gap and a torque limiter must be installed to protect the equipment.
These values correspond to ditch water with 150 ppm of S.S. For urban wastewater, the use of a safety factor of 3 is recommended in order to allow for the timed operation of the equipment. For other applications consult FILTRAMAS, S.A.
|
CLIENTE / CUSTOMER |
CANT./QTY |
PROYECTO / PROJECT |
| ACCIONA AGUA |
1 |
EDR DEIA REMODELACION (MALLORCA) |
| AQUALIA |
1 |
EDAR LA LINEA |
| CADAGUA |
1 |
EBAR GALICA (MALAGA) |
| CANDIDO ZAMORA |
1 |
|
| COCETT, S.L. |
1 |
E.S. Y LAVADERO POLARIS |
| DAM |
1 TTP-2040 |
EDAR CAÑADA DE LA LEÑA (MURCIA) |
| DYTRAS |
1 |
EDAR´S AVILA:CEBREROS |
| DYTRAS |
1 |
EDAR´S AVILA EL BARRACO |
| DYTRAS |
1TT-2030 |
EDAR PRIEGO/CORDOBA |
| FACSA |
2TT-2050 |
EDAR´S RIBESALBES Y LA POBLA TORNESA |
| FERROVIAL AGROMAN |
1 TTP-2040 |
COLECTOR ESTACION DE BLANCA - MURCIA |
| FIBERGLAS |
1 TTT-2040 |
FABRICA DE SABON |
| IMFLUID S.L. |
3 |
--- |
| LABYGEMA |
1 TTP-2020 |
|
| MEYDE S.L. |
1 |
EDAR´S PUEBLOS DE GRANADA |
| OCIDE CONSTRUCCIONES |
1TP-2020 |
EDAR ALBAIDA |
| OCIDE CONSTRUCCIONES |
1TP-2060 |
EDAR ALBAIDA |
| SOCAMEX |
1 |
EDAR EL CARPIO |
| TECNOBACTER, S.L. |
1 |
EDAR Alfarnate/Málaga |
| TRITIO SA |
1 |
--- |
| U.T.E. EFLUENTES AERONAVES |
2 |
PLAN BARAJAS |
| UTE EDAR TORRELAGUNA |
1 |
EDAR TORRELAGUNA |
| UTE PUERTO III BAHIA SAN KRISTOBAL |
1 |
EDAR CP PUERTO III |
| UTE SYD AGUAS XLIX (SAV-DAM) |
1 |
EDAR BENIZAR (MURCIA) |
| UTE SYD AGUAS XLVIII (SAV-DAM) |
1 |
EDAR CAÑADA DE LA CRUZ |
| UTE UICESA DHA |
1 |
EDAR CENTRO PENITENCIARIO |
FILTRAMAS, S.A. has a wide range of solutions for the transport and compacting of the waste extracted by its machines, in a clean and discreet. The conveying and compacting systems can be with screws with final draining zone or hydraulic presses.
The conveyor-compactor screws supplied by FILTRAMAS, S.A., coupled together with its equipment, allow us to obtain a totally clean and fair-faced installation. The screw loading openings are designed for coupling to the discharge opening of the extraction equipment (bars movable grilles or screens), and the intermediate spaces are covered by a fairing.
Band screens are those equipments, installed in a channel or , which has a series of filtering surfaces in continuous movement. Its mission is to extract the suspended solids of a certain size that accompany the effluent. There are several types of band screens, depending on the characteristics of the effluent and the installation:
The objective of this equipment is to protect the WWTP or pumping well from the possible arrival of large objects capable of causing obstructions in the different units of the installation. This operation consists of passing the waste water through a screen that separates and evacuates the bulky materials dragged along. They will retain large-sized solids such as branches, leaves, paper, tree roots, plastics, wipes, rags, etc., preventing damage and blockages to pumps, valves, pipes and other elements present in subsequent treatment processes of the purification plant.
These devices allow to continue filtering while performing self-cleaning, being especially suitable for those applications where continuous filtering is an important parameter of the process. Filtramas recommends the installation of its FB or FW in-line filters according to the flow and filtration needs.
Filter sieves offer high performance in the solid-liquid separation process. Our range of equipment responds to the different possible needs for each case.
FILTRAMAS, S.A. has a wide range of solutions for the transport and compacting of the waste extracted by its machines, in a clean and discreet. The conveying and compacting systems can be with screws with final draining zone or hydraulic presses.
The conveyor-compactor screws supplied by FILTRAMAS, S.A., coupled together with its equipment, allow us to obtain a totally clean and fair-faced installation. The screw loading openings are designed for coupling to the discharge opening of the extraction equipment (bars movable grilles or screens), and the intermediate spaces are covered by a fairing.
In any water treatment or purification plant, there is a continuous need to isolate or regulate the flow of water in the channels and manholes or holes in walls (wall gates). This function is carried out by means of the placement of gates and cofferdams.
The result of our experience is the establishment of a standardization that determines a satisfactory result with a simple construction. For this reason, Filtramas has been developing the manufacture of penstocks and flashboards.
Filtramas manufactures channel hatches, wall hatches and cofferdams for different applications and uses.
The accumulation of solid waste in water treatment requires effective mechanized solutions for its extraction. FILTRAMAS, S.A. has a wide variety of equipment for the dragging of solid waste.
In the biological treatment of wastewater, a series of processes are generated based on the cultivation of bacterial microorganisms for the elimination of organic matter, nitrogen and phosphorus. It is one of the most common treatments for its simplicity and low cost.
FILTRAMAS, S.A. has a wide variety of equipment for bacterial culture applied to the treatment of urban and industrial wastewater.
The dewatering of sludge is an essential process in the management of solid waste generated in water treatment. FILTRAMAS, S.A. offers different mechanized solutions to the problem according to the different possible needs.
FILTRAMAS S.A. has a wide variety of solutions for all kinds of problems associated with the treatment and cleaning of water, mud and sand. We develop our specialisation on the basis of the experience accumulated by our professionals, constant effort and close collaboration with our clients. FILTRAMAS S.A. perfects new products, looking for economic and effective solutions. Any problem that arises in the handling of fluids is carefully analyzed in order to find an economically balanced solution.